Release Agent(frp) - メーカー・企業と製品の一覧

更新日： 集計期間:Sep 17, 2025～Oct 14, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Release Agentの製品一覧

1～15 件を表示 ／ 全 16 件

表示件数
Excellent heat resistance! 【Flecoat Series】 For rubber and plastic!

Excellent heat resistance! 【Flecoat Series】 For rubber and plastic!

Excellent release properties, outstanding heat resistance, and a versatile release agent, Frecoat.

【Features】 ■ Widely used in the rubber and plastic industries around the world. ■ Does not use regulated substances such as freon, taking into consideration environmental and occupational health and safety aspects. ■ Does not transfer to the product. ■ Can be continuously demolded. ■ Prevents mold contamination. ■ Easy to work with. ■ Extremely excellent heat resistance. *For more details, please contact us.

  • paint

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Release Agent No. 10

Release Agent No. 10

Liquid fluorine-based release agent for mold making and epoxy resin adhesion prevention.

We would like to introduce our "Release Agent No.10." It is used for applications such as releasing from epoxy surfaces, wood patterns, acrylic models, and polyester/urethane surfaces. Additionally, it can be used to prevent adhesion with FRP, glass, stone, and to improve the efficiency of cutting and trimming tasks with scissors and cutters. 【Usage Instructions】 ■ Apply with a soft brush. ■ Be sure to apply two coats, and after application, lightly wipe with a cloth. ■ When removing, wipe thoroughly with alcohol or warm water. ■ Can be used without air drying after application. ■ The thickness of the release layer is approximately 0.1 to 1 micron or less. *For more details, please refer to the PDF document or feel free to contact us.

  • paint

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Release Agent | Fluororesin Release Agent "Tef-Lily" (Aerosol Can)

Release Agent | Fluororesin Release Agent "Tef-Lily" (Aerosol Can)

Ideal for releasing thermosetting resins such as phenolic and epoxy resins.

Tephiriz is a release agent that adds a heat-resistant binder to fine particles of fluororesin, creating a dry lubricating film of several microns on the surface of molds through application or spraying. It contains no silicone at all. Secondary processing can be done immediately after molding. The heat resistance temperature is 250°C, making it ideal for the release of thermosetting resins such as phenolic resins that are molded at high temperatures. [Capacity: 420ml aerosol can]

  • Work tools
  • Medicines

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
CFRP-specific water-based release agent 'Yushiron Foam' SRT700W

CFRP-specific water-based release agent 'Yushiron Foam' SRT700W

CFRP-specific water-based release agent "Yushiron Foam" solves various issues occurring in the molding and processing of carbon fiber reinforced resin [Catalog available].

This is the water-based release agent "Yushiron Foam" specifically designed for CFRP, handled by Yushiro Chemical Industry Co., Ltd., which deals in metalworking oils and building maintenance products. It solves various issues arising from the molding and processing of carbon fiber reinforced plastics. 【Features】 ◆ Enables high-precision molding ◆ Reduces molding costs ◆ Also suitable for the molding and processing of GFRP (glass fiber reinforced plastic) *For more details, please refer to the catalog or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High-performance continuous release agent Fluorosurf CFRP molding case study

High-performance continuous release agent Fluorosurf CFRP molding case study

Even difficult moldings that cannot be released with regular release agents can be continuously released. Plus, there's no need for cleaning as there is no transfer to the molded product!

"FloroSurf FG-5093" is a mold release agent that dissolves a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in cases where conventional release agents fail to provide satisfactory results. It boasts exceptional durability, with a proven track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【 Case Study in Thin CFRP Molding 】 1. Background Introduction In the thin molding of carbon fiber, such as separators for fuel cells, conventional release agents would cause cracking during demolding, resulting in only about one good product out of ten sheets, leading to the abandonment of mass production. 2. Implementation Results By using FloroSurf FG-5093, continuous molding of 1000 shots became possible, and mass production was confirmed. Additionally, there is no transfer to the molded product, eliminating the need for cleaning and significantly shortening the process. *If you would like a free sample, please include "Sample Request" in your inquiry.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Rubber Molding Case] Successfully achieved continuous molding for shapes that are difficult with conventional release agents.

[Rubber Molding Case] Successfully achieved continuous molding for shapes that are difficult with conventional release agents.

In cases where conventional release agents do not work well for molding elastomers, please try Fluorosurf. There are many successful examples of continuous molding.

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. Additionally, since the release agent does not adhere to the workpiece, cleaning after molding is unnecessary. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] PTFE particles tend to settle and aggregate easily, and I want to achieve easy redispersion.

[Example] PTFE particles tend to settle and aggregate easily, and I want to achieve easy redispersion.

[Low Friction Case of Coating Agents] We will introduce the background, challenges, proposed solutions, and results of implementation from a dry lubricant manufacturer. *Samples available for distribution.

The "FluoroSurf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【Issues】 ■ It must be a PFOA-compliant product that can maintain the dispersibility of PTFE similar to C8 types over the long term. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Aerosol-type fluorine-based high-performance release agent "Mold Free" free of regulated substances.

Aerosol-type fluorine-based high-performance release agent "Mold Free" free of regulated substances.

Please use this as an alternative to the discontinued fluorine-based release agents! It provides enhanced release properties. Free of regulated substances.

A high-performance release agent with proven results in various fields, the fluorine-based release agent "Fluorosurf" has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after air-drying at room temperature. Additionally, it can be used as a substitute for release agents from other manufacturers that have been discontinued. Please note that this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please indicate "Sample Request" in your inquiry. (This is limited to corporate clients. It cannot be used for applications involving food contact or medical purposes.)

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High-performance release agent "Continuous molding possible" "For resin and rubber" "Dry non-transfer"

High-performance release agent "Continuous molding possible" "For resin and rubber" "Dry non-transfer"

Overwhelming continuous release properties. Easy application with a brush or spray. Dries at room temperature in just 5 minutes after application. The film thickness is only a few nanometers, and cleaning of the molded items is unnecessary. Sample available.

"FloroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Please try it when conventional release agents fail. 【Features】 ■ The fluoropolymer film reacts with the mold material to adhere strongly, allowing for continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, accurately reproducing surface shapes at the nano and sub-micron level. ■ FloroSurf can be applied with brushes or spray guns, while Mold Free can be applied directly from an aerosol can. Application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluoropolymer. ■ There is no accumulation of dirt on the mold, nor transfer to the workpiece, eliminating the need for cleaning processes. (Except for Mold Free MF-02S) ■ It is effective in improving resin flow. ■ There is no transfer of release agent components, so cleaning of molded products is unnecessary. ■ It is non-flammable and not classified as a hazardous material under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC measures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] A case where continuous molding became possible with CFRP thin material molding.

[Example] A case where continuous molding became possible with CFRP thin material molding.

[Case Study of Coating Agent Release] We will introduce the background, challenges, proposed solutions, and results of implementation for a battery separator manufacturer. *Samples available for distribution.

**[Issue]** - Currently, the yield rate is 0%. No good products can be obtained with conventional release agents. We want to achieve continuous molding for at least 1000 shots. **[Solution]** Using "Fluorosurf FG-5093" enables mass production of 1000 shots! Additionally, cleaning of the molded products is unnecessary, significantly improving process efficiency! Fluorosurf FG-5093, when applied to the mold, reduces the adhesion of the surface molding resin, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. *If you would like a free sample, please include "Sample Request" in your inquiry.*

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Water-based release agent "high performance and continuous release possible" "dry non-transfer" "VOC countermeasure product"

Water-based release agent "high performance and continuous release possible" "dry non-transfer" "VOC countermeasure product"

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

"FluoroSurf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molded molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on the molding site using brushes or spray guns. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * When the release performance decreases, reapplication will restore its effectiveness. * By applying it to the nozzle of extrusion molds, it can also reduce streaking. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the regulations stipulated by fire and safety laws. * The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * If you would like a free sample, please include "Sample Request" in your inquiry.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Continuous release dry release agent for fine molding "Nanoimprint"

Continuous release dry release agent for fine molding "Nanoimprint"

High release properties, compatible with nano-level surface shapes and nano-imprinting "FloroSurf" can be easily applied with a brush or spray.

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer processing and silicone release agents. When conventional release agents fail to release ⇒ We solve the problem with outstanding release performance. When you want to improve continuous release properties ⇒ Continuous release properties will be enhanced. "FloroSurf" features nano-level release components that bond tightly to the mold surface ⇒ It provides powerful release and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins, elastomers, and fragile thin materials. ~ We are offering free samples exclusively for corporate clients! ~ Please select "Request Sample" from the [Contact Button] below.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Continuous release dry release agent "Silicone-free" "No cleaning of molded products required"

Continuous release dry release agent "Silicone-free" "No cleaning of molded products required"

A dry release film is formed on the surface of the mold. Release properties are improved, and cleaning of the molded product is unnecessary. It is non-flammable and safe, plus it can be easily applied. It does not contain silicone-based compounds.

"FloroSurf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, preventing contamination of molded products and eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work well. It boasts outstanding durability, with a proven track record of continuous release for thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modification ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Release agent example: No transfer to the workpiece in dry conditions! Continuous release is possible!

Release agent example: No transfer to the workpiece in dry conditions! Continuous release is possible!

It is easy to perform release agent treatment that surpasses in-house baked fluororesin processing. Significant reduction in processing costs and delivery times!

The "Fluoro Surf FG-509X Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. When applied to the mold with a brush or spray and allowed to dry at room temperature for about 10 minutes, it reduces the adhesion of the surface molding resin, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents do not work well. The film is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. Additionally, regulated substances such as PFOS, PFOA, and PFHxS are not used. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing. ■ No need to remove the film during mold reworking. ■ No transfer of release agent components, making cleaning of molded products unnecessary. ■ Low odor and non-flammable, maintaining a good working environment and easy management.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Release agent for transparent resin: 'No cloudiness on the product!' 'Continuous release is possible.'

Release agent for transparent resin: 'No cloudiness on the product!' 'Continuous release is possible.'

A dry release film is formed on the mold surface. Continuous release is possible without causing cloudiness in the resin. Since it is dry, the release agent components do not transfer, eliminating the need for cleaning the workpiece.

The "Fluoro Surf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, so it does not dirty the molded products, eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, and since it forms a thin film at the nanometer level, it exhibits excellent release properties even for complex and precise shapes, maintaining accurate surface precision. It demonstrates its effectiveness in cases where conventional release agents do not work well. It has excellent durability, with a proven track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ The release agent component reacts with the mold material to adhere strongly, allowing for continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ It can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. ■ There is no need to remove the film during mold reworking. ■ There is no transfer of the release agent component, so cleaning of molded products is unnecessary. ■ It has low odor and is non-flammable, helping to maintain a good working environment. ■ It does not use PFAS regulated substances (such as PFOS, PFOA, PFHxS, etc.). *If you would like a free sample, please indicate "Sample Request" in your inquiry. (Corporate only)

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Release Agentに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.